Complete Windows 10 Setup from USB Pen Drive | Easy Step-by-Step Guide 2024

  

Complete Windows 10 Setup | Easy Step-by-Step Guide

It is simple to install Windows 10 using a USB flash drive. Here is a step-by-step manual to assist you in finishing the installation:

Make sure you have a working Windows 10 product key and a USB flash drive with at least 8 GB of storage before you start.

Step 1: Prepare the USB Pen Drive

Your computer's USB port should now accept your USB pen drive.

As the installation procedure will destroy all of the USB drive's contents, be careful to back up any crucial data there.

Step 2: Download Rufus Software

To make a Windows 10 bootable USB drive, use the downloaded application and follow the on-screen directions. This procedure could require some time.

Step 3: Boot from the USB Drive

Switch off your computer.

Press the relevant key to view the boot menu or BIOS/UEFI settings while it is booting up. The key to access these options may be F2, F12, Del, or Esc, depending on the maker of your computer. To locate the right key, consult the manual that came with your computer.

Choose the USB drive as the primary boot device in the BIOS or UEFI settings or boot menu. Exit the BIOS/UEFI settings after saving the modifications.

You should now see the Windows Setup page after your computer has successfully booted from the USB disk.

Step 4: Install Windows 10

After making your selections for the keyboard, time, currency, and language, click "Next."

Then select "Install Now."

When asked, enter your Windows 10 product key. If you don't have one, you can decide to create one later, but after Windows is installed, you'll need to activate it.

After reading and agreeing to the licensing conditions, select "Next."

When prompted for the installation type, select "Custom: Install Windows only (advanced)".

Choose the partition (often "Drive 0 Partition 2" or something similar) where you wish to install Windows, then click "Next." Partitions can be created or formatted here if necessary.

The setup procedure will start. Throughout this process, your computer will restart multiple times.

Step 5: Complete Windows Setup

When Windows has been installed, you will be given the option to change your settings. To configure your location, keyboard layout, and account settings, follow the on-screen instructions.

Sign in with your Microsoft account or, if you'd like, make a local account.

To finish the setup process, follow the on-screen instructions. These include selecting privacy options, configuring Cortana (Windows' voice assistant), and selecting a name for your machine.

You'll be sent to the Windows 10 desktop after the installationInstalling drivers for your devices, in particular graphics, network, and chipset drivers, is crucial after configuring Windows. These are normally available on the website of the company that makes your computer.

Run Windows Update as well to make sure your PC has the most recent security and driver upgrades.

I'm done now! You have successfully finished installing Windows 10 on a USB flash drive. You can now start using your computer.

 is complete.

Step 6: Install Drivers and Updates

Installing drivers for your devices, in particular graphics, network, and chipset drivers, is crucial after configuring Windows. These are normally available on the website of the company that makes your computer.

Run Windows Update as well to make sure your PC has the most recent security and driver upgrades.

I'm done now! You have successfully finished installing Windows 10 on a USB flash drive. You can now start using your computer.

Rufus-3.18_BETA older version